www.deadharddrive.com

smahaf · Posted once Joined: 05 Jan 2011 Posts: 1 Location: Malaga

Hi the drive details are:-
Hitach 640GB
P/N 0A38114
Model: HDT721064SLA360
MLC: BA3013

On the board itself there is the following code: 0A29985BA3129-MfF852N6Z8

When the drive was connected to the power there was a smell of the circuit board burning.. I would like to see if with a new logic board the drive spins up ok

fzabkar · Deadharddrive regular +3 Joined: 02 Apr 2010 Posts: 210

It sounds like your problem may be a shorted TVS diode, in which case the solution may be as simple as removing it with flush cutters.

If you upload a detailed photo of the component side of the PCB, one of us will identify the faulty component for you.

BTW, a board swap will probably not work. You need to transfer the NVRAM chip from patient to donor. Once again, a photo will help us identify the NVRAM for you.

Eric Lee · Posted: Thu Jan 06, 2011 1:49 pm Post subject:

Hi, I have such a working PCB in stock, pls contact my hotmail.

Thanks.
Eric
_________________
HK MingDi electronics Co., Ltd. http://www.hkmingdi.com/enindex.asp
MSN/E-mail：eric_lee8341@hotmail.com
Specialize in HDD PCB!!! Real in stock!!
Skype：eric.lee1984

sunnydreamspace · Deadharddrive regular +5 Joined: 04 Jan 2009 Posts: 540

hi,
i have this PCB in stock. please contact me by email or skype.
_________________
provide Hard drive PCB,entire drive/ Data Recovery service.... big HDD resource. talk to me immediately! sunnydreamspace@hotmail.com
skype: sunnydreamspace

sopan1971 · Officially active! Joined: 27 Jul 2011 Posts: 2

Hitach 640GB
P/N 0A38114
Model: HDT721064SLA360

Date: MAR - 2009

Hi, i have this HD wich try to spin but it cann't.

Always the same.
Try to spin, make a noise, stopped, and again try to spin, make a noise, ...

I found a new HD, same Model HDT721064SLA360 but Date of 2010 and 2011.

Is it possible to fix the old HD?

Do I need something else?

Thanks

leon2046 · Deadharddrive regular +1 Joined: 27 Aug 2010 Posts: 29

This shop has lots of IBM/Hitachi PCB, check here

http://www.hddzone.com/ibmhitachi-pcb-c-4.html

You can contact them for help.

corbingravely · Posted: Fri Jun 12, 2015 9:20 am Post subject:

I think you can post it in quickr or OLX. You could get a good one within no time. Well, that is the best solution that I guess I can fetch for you. But then it is all up to you.

------------------------------------------
CORBIN GRAVELY
Beverly Diamonds Ripoff Report
------------------------------------------