www.deadharddrive.com
Deadharddrive forum
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Seagate Barracuda 7200.10 failing/failed, but can still see

 
Post new topic   Reply to topic    www.deadharddrive.com Forum Index -> General chat
View previous topic :: View next topic  
Author Message
brentt
Officially active!


Joined: 14 Apr 2009
Posts: 3
Location: NJ

PostPosted: Tue Apr 14, 2009 2:27 pm    Post subject: Seagate Barracuda 7200.10 failing/failed, but can still see Reply with quote

It is a SATA drive mounted in a free agent external enclosure. I did remove it from the enclosure just to eliminate that as an issue.

This is what happened. The enclosure sits upright. I had it attached to a laptop transferring files. My Son kicked it over onto it?s side while it was writing. I got a delayed write error.

The drive spins up, my computer sees it. When it first spins up I can see my files. If I try to copy them, I will get one file or so to copy over, then I get the delayed write failure. If I unplug it, and plug it back in, I can see the files again for a short time. I seem to have better luck when the drive has been off and is cold.

Any idea what I need to do to recover my files? I was told it might be my heads, and I should swap them. But I wanted to see if anyone thinks I can get the data off the drive without opening it, since I can still see the data for short timeframes.
________
MARIJUANA


Last edited by brentt on Sat Feb 12, 2011 1:20 pm; edited 1 time in total
Back to top
View user's profile Send private message
harddrivespecialist
Deadharddrive regular +4


Joined: 29 Dec 2007
Posts: 471
Location: Providence, RI. Boston, MA USA

PostPosted: Tue Apr 14, 2009 2:44 pm    Post subject: Reply with quote

Your drive has a physical damage on a platter surface.
That damage was created during a fall, drive's heads hit a surface of the platters and created a scratch.
If your drive still can recognize itself, your heads should be in working condition at that moment.

Every time you are trying to read your files, heads will hit a scratch on a surface and will damage themselfs.

There is a way to get your data off, but you will need very expensive equipment ranging in price from $2500-$15000
_________________
www.datarecoveryne.com
Back to top
View user's profile Send private message Visit poster's website
brentt
Officially active!


Joined: 14 Apr 2009
Posts: 3
Location: NJ

PostPosted: Tue Apr 14, 2009 3:31 pm    Post subject: ok thanks, but is there Reply with quote

I read somewhere there is software that will read/copy your data up to the spot that has damage. You can do the read copy from both ends, and will retrieve your data other then where the damage is.

Does anyone know if this is true, and what software? Also, can this bad part of the drive be mapped, and ignored, like bad sectors?

I have copied about 30 files off the drive so far, but it's slow going.
________
Ford falcon history


Last edited by brentt on Sat Feb 12, 2011 1:20 pm; edited 1 time in total
Back to top
View user's profile Send private message
harddrivespecialist
Deadharddrive regular +4


Joined: 29 Dec 2007
Posts: 471
Location: Providence, RI. Boston, MA USA

PostPosted: Tue Apr 14, 2009 6:07 pm    Post subject: Reply with quote

As I have mentioned in prior post, you will create more damage to your drive.

To me, its very painful to see someone destroying his own data.

Software/Hardware you asking about it is: PC3000 + Data Extractor $10,000+

It will take some time to learn to use it and it won't do it automaticaly.
_________________
www.datarecoveryne.com
Back to top
View user's profile Send private message Visit poster's website
brentt
Officially active!


Joined: 14 Apr 2009
Posts: 3
Location: NJ

PostPosted: Wed Apr 15, 2009 2:33 pm    Post subject: thanks for your reply Reply with quote

ok, thanks for the information. That software is more then the data is worth. I guess I will call a few places just to see what the cost is. I was told if you can still see the drive the cost is less then a dead drive that has to be opened in a cleanroom. I'm guessing even so, the cost will be high. I do have bits and pieces of the data backed up over 6 or 8 drives, it's just going to be a project to see what I have, and what I lost for sure.

Thanks for your help !
________
Vaporizer Volcano


Last edited by brentt on Sat Feb 12, 2011 1:20 pm; edited 1 time in total
Back to top
View user's profile Send private message
sunnydreamspace
Deadharddrive regular +5


Joined: 04 Jan 2009
Posts: 540

PostPosted: Tue Apr 21, 2009 11:41 pm    Post subject: Reply with quote

hi,
you can try to do recovery by data recovery software first. but please do with carefully.
_________________
provide Hard drive PCB,entire drive/ Data Recovery service.... big HDD resource. talk to me immediately! sunnydreamspace@hotmail.com
skype: sunnydreamspace
Back to top
View user's profile Send private message Visit poster's website AIM Address Yahoo Messenger MSN Messenger
Display posts from previous:   
Post new topic   Reply to topic    www.deadharddrive.com Forum Index -> General chat All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


www.deadharddrive.com topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group