View previous topic :: View next topic |
Author |
Message |
mav6932 Posted once
Joined: 05 Aug 2007 Posts: 1
|
Posted: Mon Aug 06, 2007 3:12 am Post subject: Seagate Barracuda 320GB ST3320620A:firmware 3.AAE |
|
|
Let me first start my first post by saying wow, this site is amazing.
I have a Seagate Barracuda 7200.10 320Gig Harddrive that is not working. I think the board is at fault. It might be a faulty Capacitor (ST Micorelectronics BUX C641), but I cannot find any information or a replacement on the net. I was wondering if any of you guys might have a board I can use.
The specs are
Seagate Barracuda 7200.10 320GB
ST3320620A
Fimware:3.AAE
Site code: WU
Please contact me if you have a board I can buy
Thanks |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|
Chris_m Officially active!
Joined: 28 Aug 2007 Posts: 2
|
Posted: Tue Aug 28, 2007 9:46 am Post subject: |
|
|
Hey man, may be I could help you. I can get a
Seagate Barracuda 7200.10 320GB
ST3320620A
Fimware:3.AAE
I don't know anything about the site code. Is that number important?
You can reach me at
chris.p.marcel@gmail.com
I live in The Netherlands.
Greetings,
Christian
PS: I am looking the same drive but with firmware 3.AAC, could you help me with that? |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
golfer1 Officially active!
Joined: 05 Sep 2007 Posts: 2
|
Posted: Wed Sep 05, 2007 1:35 pm Post subject: |
|
|
Chris_m wrote: | Hey man, may be I could help you. I can get a
Seagate Barracuda 7200.10 320GB
ST3320620A
Fimware:3.AAE
I don't know anything about the site code. Is that number important?
You can reach me at
chris.p.marcel@gmail.com
I live in The Netherlands.
Greetings,
Christian
PS: I am looking the same drive but with firmware 3.AAC, could you help me with that? |
Hey, would it be possible for you to check the Chipset on that board?
I need one with the ST Chipset rather than the Agere.
If so, I am very interested. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
dmshep Active contributor
Joined: 09 Sep 2007 Posts: 5
|
Posted: Mon Sep 10, 2007 4:58 am Post subject: |
|
|
I'm looking for exactly this PCB as well, same specs, but with the Agere chipset. If golfer hasn't taken it, I'm big time interested. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
rhagerty Deadharddrive regular
Joined: 31 Jan 2008 Posts: 11
|
Posted: Thu Jan 31, 2008 3:10 am Post subject: |
|
|
I'm in the same boat. Anyone got the board? |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
rhagerty Deadharddrive regular
Joined: 31 Jan 2008 Posts: 11
|
Posted: Sun Feb 03, 2008 3:16 pm Post subject: seagate success |
|
|
I just did a straight swap of ST3320620A, Firmware: 3.AAE, S/N 9QF4, Site Code: TK, P/N 9BJ04G for ST303204N1A1A-RK , Firmware: 3.AAE, S/N 9QF6DD5K, Site Code: TK, P/N 9BJ0A4 (note the multiple differences) and it worked flawlessly. No ROM chip exchange needed. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
bucheron_59 Deadharddrive regular +3
Joined: 05 Sep 2007 Posts: 111 Location: Cambrai, FRANCE
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
elchmaen Officially active!
Joined: 18 Mar 2008 Posts: 3
|
Posted: Tue Mar 18, 2008 8:29 am Post subject: |
|
|
Hello folks,
I have a problem with my ST3320620A and after reading this great board I want to give the PCB swap a try.
So is this PCB for ST3320620A FW:3.AAE SC: TK still available? I am willing to buy it and if necessary resell it afterwards.
I am also in the Netherlands but shipping to Germany is not a big problem.
Oh, my problem: I placed this Seagate in an IcyBox and now it starts to click when trying to access it, blocking the IDE bus. Motor spins up.
Starting without IDE connected works fine, motor spins up.
I had the same prob with another Seagate in that IcyBox.
An IcyBox is an external USB/FireWire housing.
Thanks for any help in advance,
René |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
cheadledatarecovery1 Deadharddrive regular +1
Joined: 22 Feb 2008 Posts: 33
|
Posted: Wed Apr 09, 2008 9:37 am Post subject: I have... |
|
|
Have you had any luck finding one? In front of me I have the following which I can offer:
ST3320620A
P/N: 9BJ04G-305
3.AAE
Site: WU (although this shouldn't make a difference)
I have just used this myself for a PCB swap to get a similar drive working.
Contact me asap as this drive is meant ot be picked up by a customer of mine on Thursday/Friday, but I can always go and get them a new disk.
All the best,
John |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
furogato Officially active!
Joined: 09 Apr 2008 Posts: 2 Location: Houston, TX USA
|
Posted: Wed Apr 09, 2008 9:59 pm Post subject: |
|
|
What are the chances that the PCB for a 320Gb SATA
Model: ST3320620A
P/N: 9BJ04G-305
Firmware: 3.AAE
would work on a 300Gb SATA with similar specs?
Model: ST3300620AS
P/N: 9BJ143-305
Firmware: 3.AAE
The chipset on my burnt PCB says Agere. I posted a new thread for the 300Gb PCB and then saw that the numbers are almost the same.
Here's a photo of my burnt ST3300620AS PCB
Thanks
Mike
Also, www.newegg.com has the ST3320620AS in stock. http://www.newegg.com/Product/Product.aspx?Item=N82E16822148140[/img] |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
cheadledatarecovery1 Deadharddrive regular +1
Joined: 22 Feb 2008 Posts: 33
|
Posted: Wed Apr 09, 2008 11:11 pm Post subject: |
|
|
Furogato - The chances of my board getting your drive working are absolutely zero. The part number is still very important and in this case will cause a conflict, primarily because my drive is a PATA connection and yours is a SATA.
Also to 'Elchmaen' the clicking noise you can hear is not going to be fixed by a PCB exchange. If it is a repetitive clicking sound and your HDD does not detect in the BIOS the likely causes are head crash, faulty firmware (v. frequent in Western Digital Drives) or pre-amplifier fault. None of which can be fixed by a straight PCB swap.
Faulty or corrupt firmware must be manipulated by a machine like the PC-3000.
I hope this all helps!
visit me at...
www.cheadledatarecovery.co.uk
All the best,
John |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
elchmaen Officially active!
Joined: 18 Mar 2008 Posts: 3
|
Posted: Thu Apr 10, 2008 7:42 am Post subject: |
|
|
Hi John,
how much would a diagnosis and a possible firmware reflash cost? I assume you read my other post. If not, the clicking noise appeared right after installing it into an IcyBox. It happened also to a ST3500630A.
But a ST3250620A works fine in that IcyBox. And other drives, too.
BTW, if the PCB swap does not help there is no sense in buying your drive, is there?
Kind regards
René |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Arkadas Deadharddrive regular +1
Joined: 25 Nov 2006 Posts: 28 Location: istanbul
|
Posted: Thu Apr 10, 2008 9:35 am Post subject: |
|
|
![](http://www.arkadasbilgisayar.com/images/products/harddisk_kart/forum/ST3320620A_7200_10.jpg) _________________ Arkadas Bilgisayar
Data Recovery Service TURKEY
http://www.datakurtarma.com |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
cheadledatarecovery1 Deadharddrive regular +1
Joined: 22 Feb 2008 Posts: 33
|
Posted: Thu Apr 10, 2008 9:43 am Post subject: |
|
|
Yes that's right buying the PCB from me is unlikely to solve your problem. Although I have my own data recovery company I'm not here to profiteer as I myself find these forums a useful place to share knowledge (and parts).
With regard to what you sent me in a private message (I hope you don't mind me posting it):
"Yes, drive spins up. As long as there is no access attempt via the IDE interface or no IDE cable attached it just spins and remains silent.
Sometimes it is detected by the BIOS, sometimes not.
A USB-to-IDE adapter also causes the drive to click the moment the OS (W2K) tries to identify/access the drive and tries to mount it. "Identification" works, ie. in the removable drives window there is a USB drive which is labelled as ST3320630A. This is where the procedure stops. The drive blocks the IDE interface (or here USB) and clicks and after some time spins down."
Some help and advice.
1) First off forget about trying to connect it through a usb interface. You add a whole layer of software & interfacing devices by trying to access your HDD as a mass storage device in windows. It will just make life more difficult.
2) I've had a few disks in that sometimes detect in the bios and sometimes don't. Usually this is typical of a drives read/write capabilities starting to fail. This can be caused by a number of faults including heads that are becoming worn or misaligned.
3) About the clicking noise you get when it DOES detect in the bios. I have a feeling this is due to bad sectors at the start of the drive.
It's quite hard to say what is exactly wrong with the drive without viewing the drive in person. However, I suggest that you try your luck at getting it to detect in the bios and have another empty HDD plugged in andthen boot to some suitable cloning software which operates in DOS (do not attempt to try & boot to windows!). Perform a reverse clone, with a sector skip for unreadable areas, to get as much of your data as possible.
I hope this helps,
John |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
elchmaen Officially active!
Joined: 18 Mar 2008 Posts: 3
|
Posted: Thu Apr 10, 2008 12:03 pm Post subject: |
|
|
Thanks for the reply. Maybe one point was not clear enough:
Although the drive is detected by the BIOS there is no way for me accessing it because it starts to click and then the IDE-Bus is blocked.
Is there may be a linux tool (preferably Freeware) that can reset the IDE-Bus so that I can access the drive?
René |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|