www.deadharddrive.com
Deadharddrive forum
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

PLEASE HELP! Data fried and I have a new PCB. WHAT TO DO!?

 
Post new topic   Reply to topic    www.deadharddrive.com Forum Index -> General chat
View previous topic :: View next topic  
Author Message
Electricmyth
Active contributor


Joined: 09 May 2010
Posts: 5

PostPosted: Tue May 11, 2010 4:42 am    Post subject: PLEASE HELP! Data fried and I have a new PCB. WHAT TO DO!? Reply with quote

(posting in right place now :/)

I have a 500gb SEAGATE external hard drive, firmware: LC11 (lacie hard drive) and I found a hard drive that does not have the same firmware but I checked the PCB numbers in the actual circuit board, not the hard drive, and found those numbers to be exactly the same. The circuit boards look exactly the same and the numbers are exactly the same but the hard drives they are connected to hare different. Should I try to replace this PCB with the seamingly identical one or could that damage my precious data further??

Also, I fried the hard drive by using my laptop cord instead of the real cord, and it just wouldnt start and computers wont even turn on when its plugged in (best buy tried it). Im assuming the PCB swap will help, and I have a PCB on the way that is exactly the same in firmware and everything, but i dont know if using the one I have might help? Or should I risk my time, and project grade, by waiting for the new PCB?? PLEASE HELP! I am graduating college in a few weeks and I desperately need some advice....
please email me or reply here, electricmyth@gmail.com

I love whoever helps,
sincerely,
DC
Back to top
View user's profile Send private message
fzabkar
Deadharddrive regular +3


Joined: 02 Apr 2010
Posts: 210

PostPosted: Wed May 12, 2010 12:59 am    Post subject: TVS diode Reply with quote

You have probably shorted the 12V TVS diode. If so, then the fix may be as easy as snipping it out with flush cutters. The drive should then work OK without it, but you will no longer have any overvoltage protection on the +12V supply. Be absolutely sure your PSU is OK. For continued protection, you can replace the diode with an SMBJ12A from Farnell, Mouser, Digikey.

If you upload a photo, one of can confirm the damage for you.

If this is your board ...

http://i307.photobucket.com/albums/nn281/mcdent/IMG_2629.jpg

... then the diode is at the far LH bottom side of the PCB.
Back to top
View user's profile Send private message
Electricmyth
Active contributor


Joined: 09 May 2010
Posts: 5

PostPosted: Sat May 15, 2010 2:23 am    Post subject: THANKS! Reply with quote

Thanks so much for the reply!!

But i have a question... I heard, like you said, that you could cut out the TVS DIODE on the hard drive if you have a power shortage. And i had some form of cutters, but they werent flush cutter, and attempting to cut out the TVS diode on the fried hard drive PCB, i accidentally hit the little gray chip below it. The TVS DIODE is the far left hand, bottom black box on my PCB, but i cracked the little gray thing right below it (in this picture http://i307.photobucket.com/albums/nn281/mcdent/IMG_2629.jpg)

Do you know if that will screw up my hard drive if i try testing it in this way? I cant believe i accidentally cracked the little gray chip trying to get the DIODE out :C.

Also if i go through with replacing the PCB boards, do you know if I always have to replace the ROM chip as well? I have a new board with the exact same everything (almost) and i dont know how to replace a ROM chip :C.

I really appreciate your assistance, ahah and i dont mean to bother you. Thanks again!

DC
Back to top
View user's profile Send private message
fzabkar
Deadharddrive regular +3


Joined: 02 Apr 2010
Posts: 210

PostPosted: Sat May 15, 2010 3:12 am    Post subject: Re: THANKS! Reply with quote

The part below the 12V TVS diode is a filter capacitor. The board will work without it.

Make sure your power supply is good.

Good luck.
Back to top
View user's profile Send private message
Electricmyth
Active contributor


Joined: 09 May 2010
Posts: 5

PostPosted: Sat May 15, 2010 6:11 am    Post subject: wow Reply with quote

thank you so much i absolutely appreciate every ounce of energy for helping me. tomorrow I will go out and find the right tool and reference this board to anyone in need. I am a film major at the savannah college of art and design and there are hundreds of students here losing there info everyday and they would be so happy knowing the simplicity of fixing things yourself. Ill let you know how it goes!!

thannksss~
DC
Back to top
View user's profile Send private message
sunnydreamspace
Deadharddrive regular +5


Joined: 04 Jan 2009
Posts: 540

PostPosted: Tue May 18, 2010 12:41 am    Post subject: Reply with quote

for swap PCB. never need match FW version.
and you had to swap ROM chip. here is demo video for show you how to do that http://www.youtube.com/watch?v=X2hgiDHiXKM
_________________
provide Hard drive PCB,entire drive/ Data Recovery service.... big HDD resource. talk to me immediately! sunnydreamspace@hotmail.com
skype: sunnydreamspace
Back to top
View user's profile Send private message Visit poster's website AIM Address Yahoo Messenger MSN Messenger
Eric Lee
Deadharddrive regular +4


Joined: 26 Apr 2009
Posts: 308
Location: China

PostPosted: Thu May 20, 2010 2:38 pm    Post subject: Reply with quote

Hi,

If you find a matched PCB, you have to swap rom before you swap PCB.

Thanks
Eric
_________________
HK MingDi electronics Co., Ltd. http://www.hkmingdi.com/enindex.asp
MSN/E-mail:eric_lee8341@hotmail.com
Specialize in HDD PCB!!! Real in stock!!
Skype:eric.lee1984
Back to top
View user's profile Send private message Visit poster's website MSN Messenger
Display posts from previous:   
Post new topic   Reply to topic    www.deadharddrive.com Forum Index -> General chat All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


www.deadharddrive.com topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group