www.deadharddrive.com
Deadharddrive forum
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Seagate ST96812AS PCB Swap

 
Post new topic   Reply to topic    www.deadharddrive.com Forum Index -> General chat
View previous topic :: View next topic  
Author Message
andrsslv
Officially active!


Joined: 01 Sep 2007
Posts: 3

PostPosted: Mon Sep 10, 2007 7:21 pm    Post subject: Seagate ST96812AS PCB Swap Reply with quote

Hi I have a Seagate ST96812AS with a burned PCB. My drive FW is 7.01 and I found a replacement drive to buy with FW 3.06. Also the PCB are different. Is there any way that it will work OK.
Back to top
View user's profile Send private message
rakko
Deadharddrive regular


Joined: 14 Aug 2007
Posts: 18

PostPosted: Wed Sep 12, 2007 3:57 am    Post subject: Reply with quote

What do you mean the PCBs are different?

I also tried a PCB with a different firmware on my 7.01 drive. It didn't work, but then (as I mentioned in another thread) a 7.01 PCB didn't work either.

Is your drive from a Mac?
Back to top
View user's profile Send private message
andrsslv
Officially active!


Joined: 01 Sep 2007
Posts: 3

PostPosted: Wed Sep 19, 2007 2:17 pm    Post subject: Reply with quote

Yes. It's from a Macbook.
Back to top
View user's profile Send private message
leon2046
Deadharddrive regular +1


Joined: 27 Aug 2010
Posts: 29

PostPosted: Sat Aug 28, 2010 1:27 am    Post subject: seagate Reply with quote

Try to find a matching pcb with the same firmware. Sometimes you should also exchange the BIOS on the PCB.

Here is a link you can try: http://www.hddzone.com/seagate-pcb-c-1.html
Back to top
View user's profile Send private message
rakko
Deadharddrive regular


Joined: 14 Aug 2007
Posts: 18

PostPosted: Sat Aug 28, 2010 6:07 am    Post subject: Reply with quote

What do you mean about exchanging the BIOS?
Back to top
View user's profile Send private message
leon2046
Deadharddrive regular +1


Joined: 27 Aug 2010
Posts: 29

PostPosted: Tue Aug 31, 2010 12:30 am    Post subject: exchange the BIOS Reply with quote

The BIOS contains some related info of your hard drive. So sometimes we need to use the old BIOS chip to your new PCB.
Back to top
View user's profile Send private message
leon2046
Deadharddrive regular +1


Joined: 27 Aug 2010
Posts: 29

PostPosted: Tue Aug 31, 2010 12:30 am    Post subject: exchange the BIOS Reply with quote

The BIOS contains some related info of your hard drive. So sometimes we need to use the old BIOS chip to your new PCB.
Back to top
View user's profile Send private message
sunnydreamspace
Deadharddrive regular +5


Joined: 04 Jan 2009
Posts: 540

PostPosted: Thu Sep 02, 2010 12:56 am    Post subject: Reply with quote

for swap kind of PCB. you just need to find out the same model of your PCB will be fine. and you need soldering original ROM chip from bad PCB to good PCB. it contain Adapter data matching with FW which stock in platters. i have this PCB in stock. please feel free to contact me by email or MSN if need help. thanks. Smile
_________________
provide Hard drive PCB,entire drive/ Data Recovery service.... big HDD resource. talk to me immediately! sunnydreamspace@hotmail.com
skype: sunnydreamspace
Back to top
View user's profile Send private message Visit poster's website AIM Address Yahoo Messenger MSN Messenger
Eric Lee
Deadharddrive regular +4


Joined: 26 Apr 2009
Posts: 308
Location: China

PostPosted: Mon Sep 06, 2010 4:08 am    Post subject: Reply with quote

Hi, I have this kinds of working PCB in stock too, pls contact my hotmail too. Thanks
_________________
HK MingDi electronics Co., Ltd. http://www.hkmingdi.com/enindex.asp
MSN/E-mail:eric_lee8341@hotmail.com
Specialize in HDD PCB!!! Real in stock!!
Skype:eric.lee1984
Back to top
View user's profile Send private message Visit poster's website MSN Messenger
fzabkar
Deadharddrive regular +3


Joined: 02 Apr 2010
Posts: 210

PostPosted: Mon Sep 06, 2010 9:40 am    Post subject: Seagate ST96812AS PCB Swap Reply with quote

If you need to purchase a PCB, try the following vendor:
http://www.onepcbsolution.com/

His price is US$40, plus $10 for a ROM transfer, if required.

BTW, I am not associated with any supplier.

Otherwise, upload a detailed photo of your PCB and one of us will help you with a DIY repair, if feasible.
Back to top
View user's profile Send private message
wdmjys
Deadharddrive regular +2


Joined: 02 Oct 2010
Posts: 51

PostPosted: Sat May 07, 2011 6:34 am    Post subject: Re: seagate Reply with quote

leon2046 wrote:
Try to find a matching pcb with the same firmware. Sometimes you should also exchange the BIOS on the PCB.

Here is a link you can try: http://www.hddzone.com/seagate-pcb-c-1.html


Just wanted to Thank You! The board worked out great! I just ordered another board to try resurrecting another hard drive.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    www.deadharddrive.com Forum Index -> General chat All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


www.deadharddrive.com topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group