www.deadharddrive.com
Deadharddrive forum
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

WD1600BB-22GUCO Not in BIOS, No spin-up ?

 
Post new topic   Reply to topic    www.deadharddrive.com Forum Index -> General chat
View previous topic :: View next topic  
Author Message
rkpatt
Officially active!


Joined: 03 Aug 2011
Posts: 2

PostPosted: Fri Aug 05, 2011 5:02 pm    Post subject: WD1600BB-22GUCO Not in BIOS, No spin-up ? Reply with quote

Looking for tips on troubleshooting and repair for the failure of a hard drive - Western Digital Caviar 160 GB EIDE drive
WD1600BB-22GUCO , Not recognized in BIOS , NO spin up (no clicking)

WD1600
Drive Parameters - LBA 312581808 160.0 GB
S/N - WCALL1734827

MDL: WD1600BB-22GUCO
DATE: 08 AUG 2005
DCM: BSHNTJAH

Logic board /PCB - 2060-701266-001 REV A

OS installed - WinXP

1. How can I check the logic board other than visual observation for burnt components (no noticeable smell when it failed) . How ?

2. Replacement of logic board - If I can find hard a used drive of the same type , what numbers above must be an exact match ( all of MDL ? All of DCM ? ALL on PCB ? ) to allow me the use the donor board changing the transferring the ROM chip or having it reprogrammed ?

If a replacement board doesn't work, I will just hold on to the drive until I can afford to pay a DR pro for their equipment and expertise .
Back to top
View user's profile Send private message
Eric Lee
Deadharddrive regular +4


Joined: 26 Apr 2009
Posts: 308
Location: China

PostPosted: Sun Aug 07, 2011 9:18 am    Post subject: Reply with quote

Hi, we have this kind of working PCB in stock, pls contact my hotmail to see if I can help or not.

Thanks, Eric
_________________
HK MingDi electronics Co., Ltd. http://www.hkmingdi.com/enindex.asp
MSN/E-mail:eric_lee8341@hotmail.com
Specialize in HDD PCB!!! Real in stock!!
Skype:eric.lee1984
Back to top
View user's profile Send private message Visit poster's website MSN Messenger
fzabkar
Deadharddrive regular +3


Joined: 02 Apr 2010
Posts: 210

PostPosted: Sun Aug 07, 2011 11:32 pm    Post subject: Reply with quote

This supplier includes a "firmware transfer" in the price:
http://www.hdd-parts.com/10001266.html

As for troubleshooting your board, do you have a multimeter?

If so, then measure the voltages at each of the pins of U6 (multi-output regulator), transistor Q4 (pass transistor for linear regulator), pin #8 of U12 (flash memory), pin #1 or #27 of U4 (SDRAM).

Also measure the voltage at the anode (non-striped end) of diode D7.

I'm assuming this is your board:
http://www.ledisquedur.com/img/p/98-83-thickbox.jpg

Be very careful not to slip with your probes, as you could do some serious damage. You can take the measurements with the board removed from the drive.
Back to top
View user's profile Send private message
rkpatt
Officially active!


Joined: 03 Aug 2011
Posts: 2

PostPosted: Tue Aug 09, 2011 6:15 pm    Post subject: Reply with quote

fzabkar - re: measuring the voltages . Do I need to have the motherboard and ide cable connected (live) in addition to the PSU cable for voltage measurements ?
- Thanks
Back to top
View user's profile Send private message
fzabkar
Deadharddrive regular +3


Joined: 02 Apr 2010
Posts: 210

PostPosted: Tue Aug 09, 2011 10:54 pm    Post subject: Reply with quote

Leave the IDE cable disconnected.
Back to top
View user's profile Send private message
superbiiz
Deadharddrive regular


Joined: 25 May 2011
Posts: 24

PostPosted: Thu Sep 22, 2011 4:01 am    Post subject: Reply with quote

2060-701266-001 REV A

http://www.hddzone.com/wd-2060701266001-ide-full-board-pcb-p-217.html

Are you looking for this pcb?

Here is also a useful article for finding a matching pcb, check here:

http://www.hddzone.com/conditions.html
Back to top
View user's profile Send private message
corbingravely
Deadharddrive regular +2


Joined: 14 Nov 2013
Posts: 75

PostPosted: Thu Jul 02, 2015 7:42 am    Post subject: Reply with quote

The reason that the hard disk cannot be detected is because the node it allocates is misplaced. Try to run a defragmentation on the disk. Try connecting it parallel to another working hardware. Then, format it and then defragment the disk. This should do the trick. But the problem is that you will lose all the content.






---------------------------------
CORBIN GRAVELY
nursing courses online
---------------------------------
Back to top
View user's profile Send private message
corbingravely
Deadharddrive regular +2


Joined: 14 Nov 2013
Posts: 75

PostPosted: Tue Nov 24, 2015 5:03 am    Post subject: Reply with quote

Guys I actually forgot to tell you about the power of the HARD Disk. I think you might want to check if the power source cable intact and working properly. If the hard disk does not drive enough power it will not run as expected.






---------------------------------------------
CORBIN GRAVELY
trauma nurse certification
---------------------------------------------
Back to top
View user's profile Send private message
corbingravely
Deadharddrive regular +2


Joined: 14 Nov 2013
Posts: 75

PostPosted: Wed Sep 21, 2016 12:09 pm    Post subject: Reply with quote

Also Why don't you try reconfiguring the whole hard dist. try connecting it parallel to another hard disk and try formatiing it. and then try to defragment the disk. this should work i guess.. but you wont be able to get any of your data from the disk.







---------------------------------
CORBIN GRAVELY
electronic medical record software
Back to top
View user's profile Send private message
JaredDM
Deadharddrive regular


Joined: 23 May 2016
Posts: 18
Location: Providence, RI

PostPosted: Thu Sep 22, 2016 8:45 pm    Post subject: Reply with quote

Just FYI to anyone reading this, those last three posts were just SPAM posts. Seems this guys posted in every thread to get his "nursing degree" signature spam links in.

Perhaps a moderator will remove them. Flagging now.
_________________
Hard Drive Data Recovery Service
https://www.data-medics.com

Specializing in RAID Recovery Services
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    www.deadharddrive.com Forum Index -> General chat All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


www.deadharddrive.com topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group